Led Light Strips Features
Safe working environment - Improved visibility is critical in maintaining a safe working environment underground, with poor lighting cited as a contributing factor in many underground accidents. The Strip Lights illuminates potential dangers by providing a complete flood of light from floor to ceiling, as opposed to any globe configuration where these spaced lights can blow or get damaged. This can substantially boost the efficiency of workers.
Fast and safe repairs - Repairs can be carried out safely and quickly under live conditions, by only replacing the section that failed. The ingenious ring feed design, guarantees perfectly functioning lighting even when severed, further reducing the need for repairs.
Easier installation - LED Strip Lights are much lighter weight to carry and work with compared to conventional lighting. A Female individual can easily carry up to 100 meters or more and can install or maintain sections singlehandedly.
Less downtime - Strip Lights do not typically fail catastrophically, as is usually the case with fluorescent lighting, but rather the light output generally decreases over time. This allows for a regular maintenance schedule and replacement prior to failure, maintaining consistency of lighting, and improving safety underground.
Financial Benefit - Low maintenance in direct contrast to the short lifespan and high cost of conventional lighting systems due to the continuous need for replacement of components.
Main Parameter of Outdoor Led Strip Lighting
|Led light source
||280 LED spaced evenly over a metre length
|Recommended fixing height
||5 - 6 Metres
|Colour Rendering Index CRI
||3100Lumens / M
|Voltage on lighting
||15%-20% Drop over 4 years
||Food grade silicone
||Short Circuit,Over Voltage,Over temperature,Over Current
|Impact Level Test(Shatter Resistance Level )
Led Strip Lights
Most conventional underground mining lighting systems lose up to 50% luminescence within the ﬁrst 4 to 6 months and rarely last beyond the 12-month mark.
Green Lighting LED Strip Lighting uses highly specialized components making it able to withstand being continuously energized. Green Lighting LED Strip Lighting functions at optimal eﬃciency in the most challenging environments for long periods of time. The light output lost is marginal at ±5% per annum for the ﬁrst four years, thereafter stabilizing at ±1-2% per annum.
Our plug and play system
Conventional lighting requires separate power and a wired connection to every lamp, needing the expertise of electricians. This becomes labor-intensive and costly when running many meters of lighting. The GREEN LIGHTING LED Strip Lighting plugs into an existing power source using a power supply which then connects to one end of the LED strip.
Maintenance-free. Easy to repair.
Damage to lighting through routine underground activities happens. When a conventional lamp is damaged, it results in loss of illumination over many meters – making the affected area a safety hazard until repaired by a qualified electrician. Should a section of the GREEN LIGHTING strip light be damaged, only this section loses light. The remaining portion of the strip continues to provide illumination – allowing for a safer environment. Additionally, damaged sections can be replaced in 8" strips – making it a quick and cost-effective fix.
• Intelligent temperature management, sensors monitor LED temperature and if safe parameters are exceeded the affected LED’s are automatically dimmed until safe temperatures are restored.
• Intelligent voltage surge management, restorable resistors limit overcurrent and overvoltage situations.
• AC to DC converters, miniature voltage converters.
• Short circuit protection, in the case of a short circuit the power is isolated until the circuit is normalized.
Reduced maintenance requirements
By comparison, the working life of a ﬂuorescent light is signiﬁcantly shorter than ﬁve years and therefore requires more frequent changing out of the light source, more maintenance activity, and potential operational impact.
LED Strip Lighting does not typically fail catastrophically, as is usually the case with ﬂuorescent lighting, but rather the light output generally decreases over time. This allows for a regular maintenance schedule and replacement prior to failure, maintaining consistency of lighting, and improving safety underground.
The optimum solution for mining illumination, Green Lighting LED Strip Lighting is made of a high-grade, ﬁre retardant soft Silica Gel and is IP68 rated, making it compact and robust.